Tel./ WhatsApp: +86 13319268732
WeChat: +8613319268732
E-mail: sale@autoliuma.com
Tel: +86 29-86675668
Add: No.K08 Fengdong International Automobile Accessories Square, Sanqiao St. Fengdong New City, Xi'an, Shaanxi Province, China

Five Factors to Pay Attention to When Using Car Wiper Blades

Time: 2024-12-10 Source: Author: Caleb
Pay attention to the use of wiper blades. Improper use of car wiper blades, including wipers, wiper blades, and wipers, will cause the wiper blades to be scrapped prematurely or not wipe cleanly. Regardless of the type of wiper blades, there are probably the following points that should be paid attention to during use:

1. Be sure to use it when there is rain.

As the name suggests, the wiper blade is used to clean the rain on the front windshield. It is useless without rain, and it must not be wiped dry without water. The increase in friction resistance due to the absence of water will cause damage to the rubber blades and wiper motor.

2. Even if there is rain, it should not be wiped if the rain is not large enough to start the wiper blades. Be sure to wait until there is enough rain on the glass surface. The "enough" here does not block the driver's sight.

3. It is not recommended to use wiper blades to remove dust on the windshield surface. Even if you want to do this, you must spray glass water at the same time, and you cannot wipe dry without water.

4. If there are solid objects on the windshield, such as dried droppings of birds such as pigeons, do not use the wipers to scrape them directly. Please clean the bird droppings by hand first. These hard objects can easily cause local damage to the thin slices of the wiper blades, resulting in the wipers not being able to clean the rainwater.

5. The premature scrapping of some wiper blades is directly related to improper car washing. If you do not pay attention to gently wipe the front windshield when washing the car, the oil film on the surface will be washed off. First, it is not conducive to the downflow of rainwater, causing rainwater to easily stay on the glass surface, and second, it increases the friction resistance between the rubber sheet and the glass surface. This is also the reason why the wiper blades pause for a moment because they cannot scrape. If the wiper blades do not move and the motor continues to run, it is easy to cause the motor to burn out.

Finally, AutoLiuma seat modification reminder: The result of the wiper blades scraping clean is generally a few seconds after stopping scraping. Wait a moment for the water on the glass surface to be blown dry by the wind to achieve a good cleaning effect.
©2024 Xi'an AutoLiuMa Technology Co., Ltd.