Introduction to some related issues about special vehicle seats
What should I do if I forget to raise the car window on a rainy day and the special vehicle seat gets water in it? What do we need to do about it? Let's take a look.
1. You need to disassemble the special vehicle seat. There are four screws under the seat, unscrew them. (Pay attention to whether there are seat heating or other connecting wires under the seat, which need to be removed)
2. Turn the removed seat upside down and remove the buckle under the seat with pliers.
3. Then blow it dry with a hair dryer. When it is sunny, let it dry for a day, otherwise the seat will get moldy.
I hope you must remember to check whether the doors and windows are closed when locking the car.
For drivers, the comfort of special vehicle seats will greatly affect the quality and safety of driving, especially when driving for a long time. If the seat adjustment is uncomfortable, it will be very tiring, and fatigue driving is prone to accidents. Therefore, it is very important for drivers to learn how to adjust special vehicle seats.
Adjusting the seat will cause the body and backrest to lie down immediately, which is a common situation in models with straight-pull backrest adjustment. Therefore, if the special car seat is adjusted in this form, people do not have to operate it when driving to avoid accidents. It is much safer than the knob type, but it is still not recommended to adjust it while driving.
1. Adjust the seat up and down: make sure there is enough space between the head and the roof.
2. Adjust the seat forward and backward: after adjustment, there will be a certain bend after the foot is stepped on the brake.
3. Seat back adjustment: the shoulders can lean on the backrest, and the arms can easily put the wrists on the steering wheel.
4. Seat headrest adjustment: the upper edge of the auricle is in a straight line with the middle of the headrest, and the headrest is parallel to the head. The distance between the headrest and the head should be 2-3 fingers. If the distance is too far, the protection of the head will be reduced.
The identification method of leather special car seats is as follows:
First, by observing the appearance of the leather, generally good leather seats are bright and soft in color, without reflective feeling;
Secondly, touch it with your hands to feel the texture. The surface of a good leather chair feels very good and has strong toughness. The second leather chair is smooth but hard.
Then you smell it. Genuine leather generally has no pungent smell, while fake leather generally has solvent and paint smell.
The finished product of genuine leather is a piece of leather (i.e. the skin of an animal body), while artificial imitation leather, microfiber leather, and synthetic leather are rolled.
There will be a layer of natural short fibers on the back of the leather, which will not fall off even if you scratch it with your fingernails. The back of fake leather is usually smooth cloth texture without hair fibers. There is a kind of polyurethane with fibers on the back, which is also artificial leather. You can use the following methods to identify it.
Smell
We should trust our natural weapon - the nose. Genuine leather has a natural smell, which comes from the fur itself and can never be removed. Because leather is chemically synthesized, if you smell it carefully, there will be a smell of chemical plastic, which makes people very repulsive.
Surface
The texture on the surface of the leather is processed after birth. On the entire plane, the stretching of the pattern will be intermittent, and there is no very regular pattern. The plane of fake leather is very regular, and the texture and hair spots are the same.
Touch: That is, touch the surface of the leather with your hands. If it feels smooth, soft, plump and elastic, it is leather.
Observation: The surface of genuine leather has clear fur and patterns, cowhide has symmetrical fine pores, yak leather has coarse and sparse pores, and goat leather has fish scale-like pores.
Smell: All leathers have the smell of leather; while artificial leather has a strong pungent smell of plastic.
Ignition: Tear off a little fiber from the back of genuine leather and artificial leather. After ignition, the artificial leather that emits a pungent smell and forms knots is the artificial leather; it is the genuine leather that emits the smell of hair and will not form hard lumps.
