How to Adjust the Seat of a Special Vehicle?
Adjust the seat position of a special vehicle frequently. For most people, this event will not be too high, because the car is basically driven by one person, so once it is adjusted, the seat will not be adjusted. However, if the vehicle has been driven by others before, the seat may be adjusted. At this time, if you do not pay attention to the pre-adjustment and adjust it while driving, and adjust the seat of the special vehicle while driving, if you are not careful, your whole body may lie down at once. In this way, first, you will not be able to see the road ahead; second, you may hold the steering wheel tightly to borrow anxiety, which will bring a series of serious consequences for the loss of control of the vehicle; third, you may step on the wrong pedal and cause an accident.
1. Special vehicle seat front and rear adjustment
The next step is to adjust the front and rear distance of the seat. At this time, you can use the right foot to step on the brake pedal as the adjustment standard. At this time, if the right leg can remain bent and continue to apply force, and will not feel uncomfortable due to bending, the distance is more appropriate. If the right foot is fully straightened after the brake pedal is pressed, the brake pedal cannot be pressed quickly and effectively in an emergency. The consequences can also be imagined.
2. Special vehicle seat back adjustment
Usually everyone should pay attention to observe that many people stretch their arms when holding the steering wheel with both hands, and the whole person half lies and half leans on the seat, which looks very comfortable, but it is actually a joke to their own safety, because this posture cannot effectively control the direction of the vehicle.
3. Special vehicle seat headrest adjustment
Headrest adjustment This piece of work may be ignored by some people. Some friends don’t even know that their seat headrests can be adjusted. According to actual traffic accident statistics, 7 people were injured in traffic accidents with cervical vertebrae injuries. The reason is directly related to the incorrect adjustment of the headrest, so it is necessary to correctly adjust the seat headrest.
Correct headrest adjustment method
●The height of the headrest should be flush with the upper edge of the auricle
The height of the headrest should be adjusted to be parallel to the head, and the soft part in the middle of the headrest should be parallel to the upper edge of the auricle, so that when the vehicle is severely impacted, the head and cervical vertebra can be protected to the greatest extent.
●Keep the head and headrest as small as possible
The smaller the distance between the head and the headrest, the greater the cushioning protection of the head and neck by the headrest. This spacing is at most 2-3 finger widths. In addition, we can also install a neck pillow on the seat to better protect the neck.
