Special Vehicle Mechanical Shock Absorption Driver Seat
Product details
Mechanical shock absorbing driver seat for construction vehicles
Instructions for use: Universal for all types of seats, mechanical adjustment is used for stiffness adjustment.
Headrest height adjustment
Adjustment range: 3 levels, 25mm per level
Method:
1. Move the adjustment button, press the headrest down to the desired position, and release the button.
2. Move the headrest upward to the desired position.
Backrest tilt adjustment
Adjustment range: 80°-120°
Method: Move the handle upward, turn the backrest to the desired angle, and then release the handle.
Rear end height adjustment
Adjustment range: 0-65mm, 7 levels
Method: Move the handle upward, add (reduce) appropriate force to the rear end of the seat cushion downward (upward), lower (raise) the rear end of the seat cushion to the desired position, and release the handle.
Front height adjustment
Adjustment range: 0-65mm, 7 adjustable levels
Method: Move the handle upward, add (reduce) force to the rear end of the seat cushion downward (upward), lower (raise) the front end of the seat cushion to the required position, and release the handle.
Stiffness adjustment
Adjustment range: 40-130kg
Method: Rotate the handwheel and adjust the preset force to the required position according to the road conditions and the driver's weight.
Note: The pointer must not be rotated within the range of less than 40 and greater than 130.
Front and rear position adjustment
Adjustment range: 120mm front and 110mm rear, 23 adjustable levels.
Method: Move the handle upward, move the seat forward (backward) to the required position, and release the handle.
