Tel./ WhatsApp: +86 13319268732
WeChat: +8613319268732
E-mail: sale@autoliuma.com
Tel: +86 29-86675668
Add: No.K08 Fengdong International Automobile Accessories Square, Sanqiao St. Fengdong New City, Xi'an, Shaanxi Province, China
WeChat: +8613319268732
E-mail: sale@autoliuma.com
Tel: +86 29-86675668
Add: No.K08 Fengdong International Automobile Accessories Square, Sanqiao St. Fengdong New City, Xi'an, Shaanxi Province, China
Car Seat Supplier: Production Process of Car Seats
Time: 2024-10-28 Source: Author: Caleb
Pattern making of leather chairs is the most basic and important task. This is an important indicator for measuring the quality of leather chairs. The pattern of leather chairs is checked by experienced professional technicians. After the layout is determined, the production process will begin.
The first is leather cutting. Cowhide is about 40 to 50 square feet. The leather and leather surface of the cow's back are the best parts of a piece of leather, usually used for the backrest and cushion of the seat. Because the two parts of the seat are under pressure and friction for a long time, they are also the most obvious parts for us. The leather surface of the cow's stomach and cow's neck is poor, and is usually used for the skirt of the seat or parts that are not easy to see. Leather and cloth have a certain stretching direction. Some leather chairs can be used after sitting for one or two months. Unevenness is mainly caused by incorrect cutting direction.
The second step is sewing. After the leather is cut, it enters the sewing process. Special attention is also needed here. Generally, the net bottom sponge with a thickness of 12 to 15 mm under the leather is also called super cotton. Please note that some shops cut corners here. When sewing, it is very important whether the workers are skilled. Once the leather material is sewn, it cannot be changed, otherwise it will leave obvious pinholes on the leather material. When checking, the car seat supplier recommends paying attention to whether the needle spacing of the bare thread is uniform and whether the leather head has a head. Bare, with or without burrs and whether the thread and leather color of the thread end are the same.
The third step is to suit the seat. Simply put, put the sewn leather cover on the seat. It's simple to say, but it's not easy to do. When wearing a suit, if you are not careful, the leather cover will be torn or scratched. After putting on the leather cover, you should pat the leather cover and tighten the seat with force. The nails that fix the leather cover should be rust-proof. The size and tightness of the nail distribution must be consistent. When assembling the seat, the seams between the seat cushion and the cushion should be symmetrical and neat.
The fourth step is to reinstall the seat. The door and interior space of the car are limited, and the size of the seat is not small and heavy. When reinstalling, the car seat supplier recommends that it is necessary to avoid scratching the seat surface and not touching the car paint, so it must be done according to the requirements of the reinstallation process, otherwise, if you are not careful, it will cost all your efforts.
Generally, the leather seats of five-seater cars can be produced in 3 to 4 hours.
After using the leather chair for a period of time, some car owners will encounter some troubles:
1. Bubbling: also known as separation layer, mainly because of the quality of glue. Try to use imported leather.
2. Needle cracks: problems that still exist in the material or process. Find a shop to repair.
3. Discoloration: The quality of the leather itself. Try to choose imported leather.
4. Deformation: Mainly concentrated on the cushion and backrest. This is a problem during the operation and will not be cut according to the texture of the leather.
The first is leather cutting. Cowhide is about 40 to 50 square feet. The leather and leather surface of the cow's back are the best parts of a piece of leather, usually used for the backrest and cushion of the seat. Because the two parts of the seat are under pressure and friction for a long time, they are also the most obvious parts for us. The leather surface of the cow's stomach and cow's neck is poor, and is usually used for the skirt of the seat or parts that are not easy to see. Leather and cloth have a certain stretching direction. Some leather chairs can be used after sitting for one or two months. Unevenness is mainly caused by incorrect cutting direction.
The second step is sewing. After the leather is cut, it enters the sewing process. Special attention is also needed here. Generally, the net bottom sponge with a thickness of 12 to 15 mm under the leather is also called super cotton. Please note that some shops cut corners here. When sewing, it is very important whether the workers are skilled. Once the leather material is sewn, it cannot be changed, otherwise it will leave obvious pinholes on the leather material. When checking, the car seat supplier recommends paying attention to whether the needle spacing of the bare thread is uniform and whether the leather head has a head. Bare, with or without burrs and whether the thread and leather color of the thread end are the same.
The third step is to suit the seat. Simply put, put the sewn leather cover on the seat. It's simple to say, but it's not easy to do. When wearing a suit, if you are not careful, the leather cover will be torn or scratched. After putting on the leather cover, you should pat the leather cover and tighten the seat with force. The nails that fix the leather cover should be rust-proof. The size and tightness of the nail distribution must be consistent. When assembling the seat, the seams between the seat cushion and the cushion should be symmetrical and neat.
The fourth step is to reinstall the seat. The door and interior space of the car are limited, and the size of the seat is not small and heavy. When reinstalling, the car seat supplier recommends that it is necessary to avoid scratching the seat surface and not touching the car paint, so it must be done according to the requirements of the reinstallation process, otherwise, if you are not careful, it will cost all your efforts.
Generally, the leather seats of five-seater cars can be produced in 3 to 4 hours.
After using the leather chair for a period of time, some car owners will encounter some troubles:
1. Bubbling: also known as separation layer, mainly because of the quality of glue. Try to use imported leather.
2. Needle cracks: problems that still exist in the material or process. Find a shop to repair.
3. Discoloration: The quality of the leather itself. Try to choose imported leather.
4. Deformation: Mainly concentrated on the cushion and backrest. This is a problem during the operation and will not be cut according to the texture of the leather.
