What Requirements Should be Met When Modifying Car Seats?

1. Keep a one-inch distance between the headrest and the back of the head.

2. Adjust the seat back and seat surface to about 110 degrees. The lumbar support must feel stable, but not oppressive to the back.

3. The front end of the chair surface and the inner side of the knees are kept about three fingers wide, so that the feet can easily and flexibly step on the pedals.

4. The palms must be able to flexibly operate the steering wheel without leaving the chair.

In the fierce F-1 competition, a good sitting posture will directly affect performance. Each team will tailor the cockpit for the driver. Each driver has different habits, but according to statistics, they are relaxed and natural. Sitting posture usually allows the driver to obtain lower oxygen consumption, which is not easy to fatigue, so as to maintain huge physical exertion in long-distance competitions. Maybe you don’t spend a lot of time in the car every day, but I believe you must feel backache, numbness and softness after a long run. Because the seat of the original car is difficult to fully adapt to your body shape, you can’t get a suitable sitting posture. Some people will add lumbar vertebrae, backrests and other things to the seats, but this will completely destroy the original bad coating.

The thorough solution is to replace the seats of the original car. However, the number of chairs used for modification is usually thousands or even tens of thousands, which seems very uneconomical. But you must ignore one point: under normal maintenance, its service life is very long. The important thing is that when you change the car, it can still provide you with a new car service. It is still very cost-effective. By the way, let me tell you a little secret: a well-covered chair can increase the speed of cornering! Improving the handling of a car is nothing more than changing to a harder shock absorber, a heavy spring, a strong tire, etc. From a mechanical point of view, these hardware only help you do the work of resisting centrifugal force. The loss of control and skidding of the vehicle is a phenomenon caused by the inability to resist centrifugal force. A seat with good coverage can help you resist the above-mentioned inevitable physical characteristics, and it can fix you more firmly in the seat to experience a greater limit of the vehicle and naturally face the same corners. When you do this, you can pass faster.